MT-MAG6SA 6.3mm Self-Adhesive Magnebraid

MINIMUM ORDER 10m. Magnebraid is a tinned, copper plated steel core track braid with magnetic properties. It has a much-improved lower resistance rating as compared to the former stainless-steel braid. Thus, requires almost no power taps on very large tracks. It is perfect for all slot car tracks. Its nominal size is 6.35mm wide. Since the braid is a woven product, these dimensions are indicative only. They can vary in width between 6.0mm - 6.5mm. The thickness can also vary between 0.6mm - 0.8mm. The braid is suitable for all types of slot car tracks and is especially great on tracks where you need magnetic attraction. It's sold by the metre (min. 10 metres).
During installation, you'll get a perfectly flat finish with the 3M self-adhesive backing tape that we apply. No messy glue or fussing with contact adhesive! It makes braiding a track so easy. Just tear off the backing paper and lay it down.
(We have SOLD OUT !!! of our swivel head BRAID ROLLER)
And when you are ready for a Computer Timing system checkout the TRACKMATE systems.
Application tips for Magnebraid:
- After your braid arrives, measure it and then decide how deep to cut the braid recess.
- After the paint dries, rub the recess with a narrow piece of scourer pad from the kitchen.
- Start laying the braid carefully into a dust free braid recess and up against the recess shoulder.
- After applying braid on both sides of the slot. Give it a good roll with a Braid Roller.
- Not every roll of braid comes in one continual length.