top of page
MT-2LSET(RX-Q) Modular Track system - 2 Lanes (3 tables)

MT-2LSET(RX-Q) Modular Track system - 2 Lanes (3 tables)


This is a dynamic 3 piece modular track system beautifully decorated in up to 6 colours. It is 4.1m x 1.2m and has a circuit length of over 16mts. The layout consists of track pieces, RX, Q and RA2 which can also be re-configured in different ways.

One of tables, 2L-RX creates a figure-8 and thus both lanes are exactly the same length, even after you add extra track sections. Both lanes will always remain the same length. You can add as many track sections (tables) from the wide range of track sections. Almost any brand of slot car with or without magnets runs well on the Mag-braid tracks. The lanes are pitched at 100mm so you can run 1:43, 1:32 and 1:24 scale cars. Each section (table) has side walls of 150mm wide which are 50mm above the track surface. The track is mounted on good quality steel folding legs. The tables are toggle clamped together underneath the track. So no need for tools or connectors to assemble your new track. And it can be stored away in seconds!
To help you design your layout for the area you have proposed. There is a photo of all the track pieces. Print it out and cut out each individual track section to create a puzzle, then you can arrange the pieces and start designing your layout.

Be sure to check out the accessories for your new track too! You might need controllers, a computer lap timing/race management system, a controller panel where you connect the power and controllers, or a variable power supply that you can adjust for the skill levels of the very young. Or turn it up and get ready to race!


    Call 03-9796-3830 during business hours

    Closed Mondays, Tues & Wed 10-5, Thu & Fri 10-9, Sat 10-6, Sun 12-5

    We ship regular orders within one business day

    Oversized and Bulky Track oders are shipped POA. Please call for quote


    We try to keep stock always available. But Leads times can vary between 1-2 weeks. Call us for availability 03-9796-3830. We ship Australia wide and into New Zealand. For Australian customers we use Premium carriers that specialise in handling furniture door to door. They charge a little more, but the peace of mind is worth it! They work on a monthly rotation and thus deliveries will occur only on their scheduled date within that month. Call for a quote.


    When adding extra modules into your (analogue or digital) racetrack. In some instances, there may be a need to adjust or move the power and/or lap sensing connections. We can provide this service within our factory. Or issue you with instructions if you feel capable.

    Last resort, need advice! Call us on 03-9796-3830 during normal business hours. Tuesday - Sunday. Check the Contact page for opening hours.

  • Quality materials

    The clear engraved fencing is made from tough polycarbonate.

    The white lane bordering, is a plastic moulding that we inlay so the white borders never wear off!

    Even the ripple strips are engraved into the track surface, adding to the realism.

    Some track sections have painted Sand traps. Whilst all have Green Infields.

  • Video

    The video was taken in the dispatch area of our factory of a typical track layout demonstrating the track with cars running. As well as the Computer timing system and other accessories.

  • Design Your Own

    Click here to download a pdf with all of the track sections. Then print and cut them out to create a puzzle of track pieces to design your new layout

bottom of page