MrTrax 2LSET(RX-C) Modular Track system - 2 Lanes (3 tables)
This is a dynamic 3 piece modular track system beautifully decorated in up to 6 colours by Mr Trax. It is 5.5m x 1.2m and has a circuit length of 20.9mts. The layout consists of track pieces, RX, C and RA2 which can also be re-configured in different ways.
One of tables, 2L-RX creates a figure '8' and thus both lanes are exactly the same length, even after you add extra track sections. You can add as many track sections (tables) from the wide range of Mr Trax track sections. Almost any brand of slot car with or without magnets runs well on the Magnabraid tracks. The lanes are pitched at 100mm so you can run 1:43, 1:32 and 1:24 scale cars. Each section (table) has side walls of 150mm wide which are 50mm above the track surface. The track is mounted on good quality steel folding legs. The tables are toggle clamped together underneath the track. So no need for tools or connectors to assemble your new track. And it can be stored away in seconds!
To help you design your layout for the area you have proposed. There is a photo of all the track pieces. Print it out and cut out each individual track section to create a puzzle, then you can arrange the pieces and start designing your layout.
Be sure to check out the accessories for your new track too! You might need controllers, a computer lap timing/race management system, a controller panel where you connect the power and controllers, or a variable power supply that you can adjust for the skill levels of the very young. Or turn it up and get ready to race!
Last resort and desperate for help! Call us on 03-9796-3830 during normal business hours. Tuesday - Sunday. Check the Contact page for opening hours.
We ship Australia wide, with Premium private carriers that specialise in handling furniture door to door. They charge a little more, but the peace of mind is worth it! They work on a monthly rotation and thus deliveries will occur only on their scheduled date within that month. Call for a quote. 03-9796-3830
The video was taken in the dispatch area of our factory of a typical track layout demonstrating the track with cars running. As well as the Computer timing system and other accessories.
Made to order
We sometimes have stock available. But mostly they are made to order. Leads times vary between 2-3 weeks.
As a demonstration of how fantastic this system is. We connected 31 tables creating a 83 metre circuit. There was no noticeable power loss or "soft" spots! There is no plastic track system that performs like a Mr Trax system!
We have proudly built over 65 sets so far in the last 2 years to happy customers all over Australia and New Zealand.
The clear engraved fencing is made from tough polycarbonate.
The white lane bordering, is a plastic moulding that we inlay so the white borders never wear off!
Even the ripple strips are engraved into the track surface, adding to the realism.
Some track sections have painted Sand traps. Whilst all have Green Infields.