MT-Engraved Polycarbonate Fencing 45mm x 2.4m long

We cut the fence strips out of a sheet of polycarbonate (Lexan) and engrave it to look like wire fencing. It is approx. 45mm tall x 1.5mm thick and comes in lengths of 2.4m long. It doesn't crack or splinter like Perspex or acrylic. It goes around any plastic track corner. It's so tuff, they use this material in the manufacture of safety glasses and bullet-proofing windows.
So, when cutting it to length, you'll need a pair of tin snips, or you can score a line with a sharp hobby knife. And then snap it along the cut line! Beware, the cut edges will be sharp until you dull them off with some sandpaper or scrape the edges with a de-burring tool. 
If you are adding it to a timber track at home? The fencing can be easily drilled and screwed to the sides of your timber routed track. On plastic tracks, we've used clear sticky tape and wrapped it underneath the track itself. Or you can use the clips as shown in the photos. The clips are not included in the fence price.
Track clips for Ninco and Scalextric are here
Track clips for Carerra are here
These fences not only protect your cars from flying off the track. But they will also make your track come alive!