This section last updated 27/6/2010
DIFALCO DESIGN NEWS: The Latest Innovations and New Products
All future production of controllers for road racing ,drag, 1/32 and H.O.
will now feature ball bearing triggers at no extra cost! (added 12JUL10)
This upgrade will significantly improve our controllers mechanical performance. The trigger effort will be greatly reduced giving a much lighter feel. Since ball bearings do not wear, like oilites eventually will, we can also increase the wiper arm tension on the controller so the wiper button will never loose contact with the circuit board.
"E"MOTION 3 HD30 controllers and modules are here!
Difalco announces the new "E"Motion 3 HD30 controller design is now available. The 30-band wiper design features a plug-in Resistor Network circuit board with different values to change the band response to best suit any motor from 1/24 wing to scale to HO to 1/32 home set type cars.
The overall construction of the HD30 is the same as the current controllers. The design will be offered as factory-built controllers, modules to upgrade your Parma Turbo, or you can scratch build the factory controller using our DD242 D.I.Y. Frame Kit. Since this new design is compatible with the existing controllers Difalco will also be selling an upgrade kit with a standard network installed on the main circuit board so racers can simply upgrade their current 10 or 15 band Pro Plus or Fanatic controller.
New "E"MOTION 2 controller and module features:
*New 15 band design means super smooth transition between bands. More bands mean better car control, a must, especially for scale racing. Almost twice as many bands than that west coast eight band controller means you can pick the correct entry speed into your corner. No need to settle for a band that is too fast or too slow.
*Pro Plus controllers and modules feature 15 fixed resistors with new wider resistance range. Wider range helps control your car better for today's demanding scale racing yet still handles your wing cars.
*Fanatic controllers and modules now have 15 adjustable pots and an incredible 44% more sensitivity range than our old Fanatic controllers. Just the turn of a screwdriver will slow the controller down to a crawl for your Eurosport car or quicken the response to drive the highest power G7 motors on heavy glued tracks.
*Modules: Convert your turbo to an electronic controller inexpensively! The new "E"MOTION 2 slotted circuit board mounts lower in the turbo frame. Slotted circuit board automatically locates itself up and down and side to side for simpler installation. The fuse can also be mounted on the circuit board to simplify the wiring.
*Mush button: New non locking mush button can be mounted on the rear or front edge of the circuit board. We also use this new mush button combined with a tiny slide switch for our custom relay chokes.
*Fully labelled circuit board has number dials for easy and repeatable brake, sensitivity and Fanatic pot adjustment.
DID YOU KNOW?
Difalco Design now has the great new handle colors from Parma. Purple, blue, yellow and red along with our black and clear handles are now available.
|
